A peptide COA section by section: batch details, HPLC purity, mass-spec identity and net peptide content, plus the warning signs of a weak certificate.
A certificate of analysis (COA) is the single most useful document a peptide supplier can give you. It is also the easiest one to fake, skim or misread. This guide goes through a peptide COA section by section, explains what each number actually means, and lists the warning signs that a certificate is not telling you much.
What a peptide COA is for
A COA records the results of analytical tests on one specific production batch. It answers three questions:
- Is it the right molecule? — identity, usually by mass spectrometry.
- How much of the sample is that molecule? — purity, usually by HPLC.
- Which batch does this apply to? — the lot or batch number that ties the paperwork to the vial in your hand.
If a document cannot answer all three, it is a datasheet, not a certificate of analysis.
The sections, one by one
Product and batch details
The top of the certificate should give the compound name, sequence or CAS number where relevant, the quantity per vial, the batch or lot number and the date of analysis. The batch number is the part that matters most: check that it matches the label on the vial you received.
Appearance
Usually a short line such as "white lyophilised powder". It is a basic check, but a mismatch with what you received — colour, form, a collapsed or wet cake — is worth raising with the supplier.
HPLC purity
High-performance liquid chromatography separates the components of the sample, and a UV detector draws them as peaks. Purity is the area of the main peak as a percentage of all the peaks.
A good COA states the method — column, mobile phase, wavelength — and includes the chromatogram itself, not just the number. A single clean main peak with small, well-separated impurity peaks is what you hope to see.
Two things to keep in mind:
- Purity is relative. It says how much of what the detector sees is the target peptide. It does not measure water, salts or counter-ions in the powder.
- Real numbers vary. Different compounds and different batches give different results — 98.7%, 99.4%, 96.9%. A supplier quoting an identical round figure for every product deserves a closer look.
Mass spectrometry (identity)
MS or LC-MS measures the molecular weight of what is in the sample. The COA should list the theoretical molecular weight of the peptide and the observed value. They should agree closely; a large discrepancy suggests the wrong sequence, a truncated product or a modification that should not be there.
Net peptide content (sometimes)
Some certificates also report net peptide content — the proportion of the powder's total mass that is peptide, as opposed to water and counter-ions. It is normal for this to be well below the HPLC purity figure. The two numbers measure different things; neither is "the real purity".
Sign-off
A date, the analyst or laboratory, and some form of approval. Without it, there is no way to know who stands behind the results.
Warning signs
- No batch or lot number, or a batch number that does not match your vial.
- No chromatogram — just a percentage.
- The same purity figure on every product the supplier sells.
- No identity test, or a "molecular weight" with no observed value.
- A certificate dated long before the product could have been made, or reused unchanged across years.
- An image that looks edited — mismatched fonts, misaligned tables, a different compound name in the chromatogram header.
How we publish COAs
At HiPeptides (formerly UKPeptides) we publish certificates on the product page wherever we hold them for the current batch — for example on BPC-157, GHK-Cu, CJC-1295 + Ipamorelin and GLP-3 (Reta) — so you can read them before you order. If you need the certificate for a specific batch you have received, email [email protected] with the batch number on the vial.
More on how we document batches is on our purity and testing page, and our UK peptides buyer's guide covers the other checks worth making before you choose a supplier.
Quick checklist
- Batch number on the COA matches the vial.
- HPLC method stated and chromatogram shown.
- Purity figure is specific to the batch.
- MS identity: observed weight close to theoretical.
- Dated and signed off.
For research use only. This article is educational and does not describe human, clinical or veterinary use.
Written and reviewed to our editorial standards. Explore the research peptide catalog or read more in Research Notes.
For research use only · Not for human or veterinary use



